Home › Carpenter › NC › Greensboro

Carpenter pay in Greensboro, North Carolina

Greensboro-High Point, NC metro · BLS data, May 2025

$49,910median a year · -11% vs. typical U.S. metro
$24.00median an hour
#261of 390 U.S. metros
$53,745real pay after local prices

Salary rangeCost of livingJob marketWhat to chargeCompare cities

Pay: below averageReal pay: below averageJobs growing (+3.9%)

Carpenters in the Greensboro area earn a median of $49,910 a year, 11% below the typical U.S. metro. That ranks #261 of 390 metros for carpenters nationwide.

Within driving distance, the same work pays more in Winston and Durham, but less in Burlington.

It's one of 15 North Carolina metros with published pay for this trade; see carpenter pay in North Carolina.

Carpenter pay in Greensboro at a glance

  • Carpenters in the Greensboro, NC metro earn a median $49,910 a year ($24.00 an hour), #261 of 390 U.S. metros (BLS, May 2025).
  • The middle 80% earn between $36,160 and $62,400.
  • After local prices, that median buys what $53,745 would in a typical U.S. place (BEA, 2024).
  • A typical 1-bedroom rents for $1,122 a month, 27% of the median pay (HUD, FY2027).

Check your pay here

Enter a rate to see where it falls among carpenters in Greensboro.

Comparing two real offers with overtime and commutes? Use the job offer checker.

What this means Our calculation

Pay for carpenters here is below average compared with other U.S. metros, and also below average once local prices are factored in. For the wider job market, unemployment is about the same as in most metros (4.1%) and the population is growing faster than most (+4.1% since 2020). On your own, you'd join about 1,901 one-person building finishing work businesses averaging $68,437 in revenue, and you'd need to bill roughly $66/hour to match the median salary (at our default assumptions).

Greensboro scorecard for carpenters Our calculation

Grades compare Greensboro with every other U.S. metro for this trade (A = top 20%).

DPay#261 of 390 metros
DReal pay$53,745 after local prices
DRent burden1-bed takes 27% of median pay
BLocal demand4.9 new homes per 1,000 residents
CJob market4.1% unemployment in 2025 (typical metro 4.1%)
BGoing independentsolo shops average $68,437 revenue

Pay Government data

Pay range

$36,160Entry · 10th$40,54025th$49,910Median$59,45075th$62,400Top · 90th

Shaded: the middle half of workers. Grey line: typical U.S. metro ($56,155).

Pay over time

The median pay for carpenters in the Greensboro area went from $36,270 in 2020 to $49,910 in 2025, up 37.6%. Prices rose 25% over the same period, so after inflation that's +9.8% — a real raise.

36,2702020
38,2402021
44,6602022
45,9502023
46,0902024
49,9102025

BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.

Compared with nearby metros

What the pay is really worth in Greensboro Our calculation

Prices in Greensboro run 7% below the U.S. average. Adjusted for that, a median paycheck here buys what $53,745 would in a typical place, ranking #278 of 384 on real pay.

$1,122Typical 1-bed rent / mo
$1,241Typical 2-bed rent / mo
27%of median pay goes to a 1-bed
Real pay or rent burden?

Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.

Want the full picture? Build a cost-of-living budget for Greensboro from this pay, local rent and prices.

What carpenters do

Construct, erect, install, or repair structures and fixtures made of wood and comparable materials, such as concrete forms; building frameworks, including partitions, joists, studding, and rafters; and wood stairways, window and door frames, and hardwood floors. May also install cabinets, siding, drywall, and batt or roll insulation. Includes brattice builders who build doors or brattices (ventilation walls or partitions) in underground passageways.

Blueprint-style drawing of a framed wall and roof with dimensions, illustrating carpenter work in Greensboro, North Carolina
Carpenter pay in Greensboro, NC: $49,910 median a year ($24.00/hour), BLS May 2025.

Most important day-to-day tasks

  1. Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
  2. Follow established safety rules and regulations and maintain a safe and clean environment.
  3. Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
  4. Select and order lumber or other required materials.
  5. Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.

Outlook & getting started

Nationally, carpenter jobs are projected to grow 3.9% from 2025 to 2035 (all jobs: 3.5%), with about 62,800 openings a year. About 25% are self-employed.

+3.9%10-yr job growth
62,800openings / yr (U.S.)
High school diploma or equivalentTypical education
ApprenticeshipTypical training

What the work is like Government data

How often carpenters deal with each condition, from surveys of workers in the job.

Outdoors, in all kinds of weatherOften
Indoors with heating and air conditioningSometimes
Very hot or cold conditionsSometimes
Working at heightsOften
Climbing ladders, scaffolds or polesSometimes
Cramped spaces and awkward positionsOccasionally
Loud noiseVery often
Hazardous conditionsOccasionally
Standing, bending, kneeling and walkingOften
SittingRarely

Getting started usually takes some preparation (high school plus months of training).

O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.

Getting started: registered apprenticeship Government data

Most carpenters train through a paid apprenticeship: you work and earn under experienced pros while taking classes, and pay usually rises as you progress. 727,586 people were active registered apprentices nationwide in FY2026, up 87% since FY2016, and construction is the largest field with 290,043 of them (40%), according to the U.S. Department of Labor.

Search apprenticeship openings near Greensboro ↗Find training programs & sponsors ↗

Official U.S. Department of Labor tools at Apprenticeship.gov. Counts: DOL Apprentices by State dashboard, FY2026 (all occupations).

Licensing in North Carolina Official source

The main state licensing office in North Carolina is the North Carolina Licensing Board for General Contractors. Electrical and plumbing/HVAC have their own state boards. It can point you to the right license for carpenters.

Official North Carolina licensing site ↗

Requirements for carpenters vary by state and sometimes by city; always confirm with the official agency.

On-the-job safety Government data

Nationally, carpenters have 165 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 1.9× the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.

BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).

Highest-paying NC metros for carpenters

MetroMedianReal payJobs
DurhamNORTH CAROLINA · NC$51,540$52,823520
AshevilleNORTH CAROLINA · NC$51,290$53,147750
CharlotteNORTH CAROLINA · NC$50,960$52,3483,730
WilmingtonNORTH CAROLINA · NC$50,830$52,716640
RaleighNORTH CAROLINA · NC$50,820$51,7742,680
WinstonNORTH CAROLINA · NC$49,940$54,257510
GoldsboroNORTH CAROLINA · NC$49,920$56,43160
GreensboroNORTH CAROLINA · NC$49,910$53,745760
BurlingtonNORTH CAROLINA · NC$49,280$52,878100
JacksonvilleNORTH CAROLINA · NC$48,880$53,081140

See every metro in North Carolina.

How much work is there? Government data

Local job market

The Greensboro area's unemployment rate was 4.1% in 2025 (all workers, not just carpenters), equal to the typical U.S. metro's 4.1%. It was 5.4% in 2021.

5.4%2021
4.0%2022
3.9%2023
4.0%2024
4.1%2025

BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).

Getting to work

The average commute in the Greensboro area is 24 minutes each way, about the same as the typical metro (24 min). 10% of commuters spend 45 minutes or more. 74% drive alone, 1% take transit and 13% work from home (all workers, not just trades).

Census American Community Survey, 2024 1-year estimates (table S0801).

Population

The Greensboro area's population grew 4.1% from 2020 to 2025 (774,328 → 805,945), ranking #123 of 387 metros for growth (typical metro +2.5%). People moving in (net +32,793) account for more than all of the change.

774,3282020
778,5242021
784,7942022
791,7732023
799,5452024
805,9452025

Census Bureau population estimates, July 1 of each year, 2020–2025.

Homes in Greensboro

The Greensboro area has about 350,776 homes. 42% were built before 1980 (typical metro 45%), so its housing is newer than most; 13% were built in 2010 or later. 62% of households own their home, and the median home value is $271,000.

Census American Community Survey, 2024 1-year estimates (table DP04).

New construction

New-home permits in Greensboro are roughly flat from 2021 to 2025 (3,964 → 3,830).

3,9642021
2,9932022
3,5072023
4,9762024
3,8302025

In 2025 the Greensboro area approved permits for 3,830 new homes (2,552 single-family), or 4.9 per 1,000 residents, ranking #140 of 393 metros.

Competition

In 2024 the area had 1,901 one-person businesses (no employees) in building finishing work, averaging $68,437 a year in revenue before expenses. See how Greensboro compares among the best cities to start a carpenter business.

They compete with 280 building finishing work companies that have employees (about 1,609 workers in total). 72% of those companies have fewer than 5 employees.

Working outdoors in Greensboro Government data

In an average year, Greensboro has 42 days at 90°F or hotter (about typical; typical metro 33), 63 nights below freezing (typical 90) and 86 days with a tenth of an inch of rain or more. Summer afternoons average 87°F and winter nights 32°F. That matters for carpenters: heat and freezes shape the working season and the hours.

NOAA U.S. Climate Normals, 1991–2020 averages, Greensboro Wtp, NC station. Compare cities on outdoor work weather.

Where to train near Greensboro Government data

1 school in or near Greensboro offers carpentry programs below the bachelor's level. Many people in this trade learn through an apprenticeship instead; a program can shorten it or get you hired as a helper.

SchoolCredentialYearly costRecent gradsFirst-year pay
Guilford Technical Community College
Jamestown, NC · Public
Certificate$22,6848—

U.S. Department of Education College Scorecard (data updated October 2026). Cost is the school's average yearly cost of attendance before financial aid; earnings are the median for graduates one year after finishing, shown only where the school has enough graduates to publish. “—” means not published.

Employee vs. working for yourself Your scenario

A model, not a market rate. It shows the break-even rate to match a $49,910 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.

Break-even rate

With your profit margin

How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.

Get carpenter pricing & estimate templates →

Compare Greensboro with another city →

Keep exploring

About this data

Local to the Greensboro metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank Greensboro against every other metro for carpenters. Every source, year and formula is on our data page.

Report a data issue on this page

Top