Industrial Machinery Mechanics in the Gadsden area earn a median of $59,330 a year, 7% below the typical U.S. metro. That ranks #332 of 388 metros for industrial machinery mechanic pay nationwide.
Within driving distance, the same work pays more in Anniston and Rome, but less in Dalton.
It's one of 12 Alabama metros with published pay for this trade; see industrial machinery mechanics across Alabama.
What this means Our calculation
Pay for industrial machinery mechanics here is in the bottom 20% of U.S. metros, and about average once local prices are factored in. For the wider job market, unemployment is lower than in most metros (3.0%) and the population is growing slowly (+0.4% since 2020). On your own, you'd join about 16 one-person industrial machinery repair businesses averaging $64,562 in revenue, and you'd need to bill roughly $74/hour to match the median salary (at our default assumptions).
Gadsden scorecard for industrial machinery mechanics Our calculation
Grades compare Gadsden with every other U.S. metro for this trade (A = top 20%).
Pay Government data
Pay range
Shaded: the middle half of workers. Grey line: typical U.S. metro ($63,865).
Pay over time
The median pay for industrial machinery mechanics in the Gadsden area went from $42,270 in 2020 to $59,330 in 2025, up 40.4%. Prices rose 25% over the same period, so after inflation that's +11.9% — a real raise.
BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.
Compared with nearby metros
Check your pay here
Enter a rate to see where it falls among industrial machinery mechanics in Gadsden.
Comparing two real offers with overtime and commutes? Use the job offer checker.
What the pay is really worth in Gadsden Our calculation
Prices in Gadsden run 14% below the U.S. average. Adjusted for that, a median paycheck here buys what $69,268 would in a typical place, ranking #185 of 382 on real pay.
Real pay or rent burden?
Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.
Want the full picture? Build a monthly budget for Gadsden from this pay, local rent and prices.
What industrial machinery mechanics do
Repair, install, adjust, or maintain industrial production and processing machinery or refinery and pipeline distribution systems. May also install, dismantle, or move machinery and heavy equipment according to plans.
Most important day-to-day tasks
- Repair or maintain the operating condition of industrial production or processing machinery or equipment.
- Repair or replace broken or malfunctioning components of machinery or equipment.
- Clean, lubricate, or adjust parts, equipment, or machinery.
- Disassemble machinery or equipment to remove parts and make repairs.
- Reassemble equipment after completion of inspections, testing, or repairs.
Outlook & getting started
Nationally, industrial machinery mechanic jobs are projected to grow 17.8% from 2025 to 2035 (all jobs: 3.5%), with about 44,400 openings a year. About 1% are self-employed.
What the work is like Government data
How often industrial machinery mechanics deal with each condition, from surveys of workers in the job.
Getting started usually takes medium preparation (vocational training or an apprenticeship, often 1–2+ years).
O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.
Licensing in Alabama Official source
The main state licensing office in Alabama is the Alabama Licensing Board for General Contractors. Electrical, HVAC and plumbing have their own state boards. It can point you to the right license for industrial machinery mechanics.
Official Alabama licensing site ↗
Requirements for industrial machinery mechanics vary by state and sometimes by city; always confirm with the official agency.
On-the-job safety Government data
Nationally, industrial machinery mechanics have 54 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 38% below the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.
BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).
Highest-paying AL metros for industrial machinery mechanics
| Metro | Median | Real pay | Jobs |
|---|---|---|---|
| DecaturALABAMA · AL | $76,990 | $88,279 | 950 |
| MobileALABAMA · AL | $63,930 | $72,567 | 1,140 |
| HuntsvilleALABAMA · AL | $63,370 | $68,087 | 1,490 |
| TuscaloosaALABAMA · AL | $62,990 | $71,806 | 1,590 |
| MontgomeryALABAMA · AL | $62,700 | $69,914 | 1,230 |
| BirminghamALABAMA · AL | $61,860 | $67,500 | 3,260 |
| AnnistonALABAMA · AL | $60,640 | $70,553 | 460 |
| AuburnALABAMA · AL | $59,380 | $67,529 | 570 |
| FlorenceALABAMA · AL | $59,370 | $69,998 | 580 |
| GadsdenALABAMA · AL | $59,330 | $69,268 | 170 |
See every metro in Alabama.
How much work is there? Government data
Local job market
The Gadsden area's unemployment rate was 3.0% in 2025 (all workers, not just industrial machinery mechanics), below the typical U.S. metro's 4.1%. It was 3.8% in 2021.
BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).
Getting to work
The average commute in the Gadsden area is 30 minutes each way, longer than the typical metro (24 min). 22% of commuters spend 45 minutes or more. 87% drive alone, 1% take transit and 2% work from home (all workers, not just trades).
Census American Community Survey, 2024 1-year estimates (table S0801).
Population
The Gadsden area's population grew 0.4% from 2020 to 2025 (103,441 → 103,886), ranking #278 of 387 metros for growth (typical metro +2.5%). People moving in (net +2,834) account for more than all of the change.
Census Bureau population estimates, July 1 of each year, 2020–2025.
New construction
New-home permits in Gadsden are down 35% from 2021 to 2025 (188 → 123).
In 2025 the Gadsden area approved permits for 123 new homes (123 single-family), or 1.2 per 1,000 residents, ranking #349 of 393 metros.
Competition
In 2024 the area had 16 one-person businesses (no employees) in industrial machinery repair, averaging $64,562 a year in revenue before expenses. See how Gadsden compares among the best cities to start an industrial machinery mechanic business.
They compete with 10 industrial machinery repair companies that have employees (about 179 workers in total). 70% of those companies have fewer than 5 employees.
Where to train near Gadsden Government data
3 schools in or near Gadsden offer heavy and industrial equipment maintenance programs below the bachelor's level. Many people in this trade learn through an apprenticeship instead; a program can shorten it or get you hired as a helper.
Where published, graduates earned a median of $59,011 in their first year out.
| School | Credential | Yearly cost | Recent grads | First-year pay |
|---|---|---|---|---|
| Gadsden State Community College Gadsden, AL · Public | Certificate | $10,254 | 134 | — |
| Gadsden State Community College Gadsden, AL · Public | Associate degree | $10,254 | 68 | $57,585 |
| Northeast Alabama Community College Rainsville, AL · Public | Certificate | $13,533 | 27 | — |
| Northeast Alabama Community College Rainsville, AL · Public | Associate degree | $13,533 | 25 | $60,437 |
| Snead State Community College Boaz, AL · Public | Certificate | $10,899 | 23 | — |
| Snead State Community College Boaz, AL · Public | Associate degree | $10,899 | 3 | — |
U.S. Department of Education College Scorecard (data updated October 2026). Cost is the school's average yearly cost of attendance before financial aid; earnings are the median for graduates one year after finishing, shown only where the school has enough graduates to publish. “—” means not published.
Employee vs. working for yourself Your scenario
A model, not a market rate. It shows the break-even rate to match a $59,330 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.
Break-even rate
With your profit margin
How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.
Get industrial machinery mechanic pricing & estimate templates →Compare Gadsden with another city →
Keep exploring
Could this trade pay more somewhere else?
ToolBest cities for industrial machinery mechanicsRank every metro on pay, buying power, rent and jobs.Is a job offer here any good?
ToolCheck an offer in GadsdenSee where it falls among local industrial machinery mechanics, after the commute.Could you afford to live here?
ToolGadsden budgetMonthly take-home, HUD rent and local prices on this pay.About this data
Local to the Gadsden metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank Gadsden against every other metro for industrial machinery mechanics. Every source, year and formula is on our data page.