Home › Industrial Machinery Mechanic › TX › San Angelo

Industrial Machinery Mechanic pay in San Angelo, Texas

San Angelo, TX metro · BLS data, May 2025

$49,960median a year · -22% vs. typical U.S. metro
$24.02median an hour
#377of 388 U.S. metros
$54,038real pay after local prices

Salary rangeCost of livingJob marketWhat to chargeCompare cities

Pay: bottom 20%Real pay: bottom 20%Jobs growing (+17.8%)

Industrial Machinery Mechanics in the San Angelo area earn a median of $49,960 a year, 22% below the typical U.S. metro. That ranks #377 of 388 metros for industrial machinery mechanics nationwide.

Within driving distance, the same work pays more in Midland and Abilene.

It's one of 25 Texas metros with published pay for this trade; see industrial machinery mechanic pay in Texas.

Industrial Machinery Mechanic pay in San Angelo at a glance

  • Industrial machinery mechanics in the San Angelo, TX metro earn a median $49,960 a year ($24.02 an hour), #377 of 388 U.S. metros (BLS, May 2025).
  • The middle 80% earn between $37,670 and $77,580.
  • After local prices, that median buys what $54,038 would in a typical U.S. place (BEA, 2024).
  • A typical 1-bedroom rents for $1,032 a month, 25% of the median pay (HUD, FY2027).

Check your pay here

Enter a rate to see where it falls among industrial machinery mechanics in San Angelo.

Comparing two real offers with overtime and commutes? Use the job offer checker.

What this means Our calculation

Pay for industrial machinery mechanics here is in the bottom 20% of U.S. metros, and also in the bottom 20% once local prices are factored in. For the wider job market, unemployment is lower than in most metros (3.3%) and the population is growing slowly (+0.3% since 2020). On your own, you'd join about 18 one-person industrial machinery repair businesses averaging $78,611 in revenue, and you'd need to bill roughly $66/hour to match the median salary (at our default assumptions).

San Angelo scorecard for industrial machinery mechanics Our calculation

Grades compare San Angelo with every other U.S. metro for this trade (A = top 20%).

FPay#377 of 388 metros
FReal pay$54,038 after local prices
DRent burden1-bed takes 25% of median pay
BLocal demand4.5 jobs per 1,000 workers
AJob market3.3% unemployment in 2025 (typical metro 4.1%)
CGoing independentsolo shops average $78,611 revenue

Pay Government data

Pay range

$37,670Entry · 10th$39,67025th$49,960Median$69,55075th$77,580Top · 90th

Shaded: the middle half of workers. Grey line: typical U.S. metro ($63,865).

Pay over time

The median pay for industrial machinery mechanics in the San Angelo area went from $43,360 in 2020 to $49,960 in 2025, up 15.2%. Prices rose 25% over the same period, so after inflation that's -8.1% — a real pay cut.

43,3602020
45,9802021
46,6102022
47,3502023
58,9702024
49,9602025

BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.

Compared with nearby metros

San AngeloTEXAS · TX$49,960

What the pay is really worth in San Angelo Our calculation

Prices in the San Angelo area run 8% below the U.S. average. Adjusted for that, a median paycheck here buys what $54,038 would in a typical place, ranking #376 of 382 on real pay.

$1,032Typical 1-bed rent / mo
$1,350Typical 2-bed rent / mo
25%of median pay goes to a 1-bed
Real pay or rent burden?

Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.

Want the full picture? Build a cost-of-living budget for San Angelo from this pay, local rent and prices.

What industrial machinery mechanics do

Repair, install, adjust, or maintain industrial production and processing machinery or refinery and pipeline distribution systems. May also install, dismantle, or move machinery and heavy equipment according to plans.

Blueprint-style drawing of a gear and wrench with torque specs, illustrating industrial machinery mechanic work in San Angelo, Texas
Industrial Machinery Mechanic pay in San Angelo, TX: $49,960 median a year ($24.02/hour), BLS May 2025.

Most important day-to-day tasks

  1. Repair or maintain the operating condition of industrial production or processing machinery or equipment.
  2. Repair or replace broken or malfunctioning components of machinery or equipment.
  3. Clean, lubricate, or adjust parts, equipment, or machinery.
  4. Disassemble machinery or equipment to remove parts and make repairs.
  5. Reassemble equipment after completion of inspections, testing, or repairs.

Outlook & getting started

Nationally, industrial machinery mechanic jobs are projected to grow 17.8% from 2025 to 2035 (all jobs: 3.5%), with about 44,400 openings a year. About 1% are self-employed.

+17.8%10-yr job growth
44,400openings / yr (U.S.)
High school diploma or equivalentTypical education
Long-term on-the-job trainingTypical training

What the work is like Government data

How often industrial machinery mechanics deal with each condition, from surveys of workers in the job.

Outdoors, in all kinds of weatherOccasionally
Indoors with heating and air conditioningOften
Very hot or cold conditionsSometimes
Working at heightsSometimes
Climbing ladders, scaffolds or polesOccasionally
Cramped spaces and awkward positionsSometimes
Loud noiseOften
Hazardous conditionsSometimes
Standing, bending, kneeling and walkingSometimes
SittingOccasionally

Getting started usually takes medium preparation (vocational training or an apprenticeship, often 1–2+ years).

O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.

Licensing in Texas Official source

The main state licensing office in Texas is the Texas Department of Licensing and Regulation. Plumbers are licensed by the Texas State Board of Plumbing Examiners. It can point you to the right license for industrial machinery mechanics.

Official Texas licensing site ↗

Requirements for industrial machinery mechanics vary by state and sometimes by city; always confirm with the official agency.

On-the-job safety Government data

Nationally, industrial machinery mechanics have 54 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 38% below the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.

BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).

Highest-paying TX metros for industrial machinery mechanics

MetroMedianReal payJobs
TexarkanaTEXAS · TX$65,980$78,536280
DallasTEXAS · TX$63,380$61,48012,730
HoustonTEXAS · TX$63,180$64,05818,360
AustinTEXAS · TX$62,660$63,8962,940
ShermanTEXAS · TX$62,400$66,545320
KilleenTEXAS · TX$61,980$68,011300
BeaumontTEXAS · TX$61,950$68,7981,430
Wichita FallsTEXAS · TX$61,330$68,515250
VictoriaTEXAS · TX$61,100$68,011310
San AntonioTEXAS · TX$60,760$64,1502,950

See every metro in Texas.

How much work is there? Government data

Local job market

The San Angelo area's unemployment rate was 3.3% in 2025 (all workers, not just industrial machinery mechanics), below the typical U.S. metro's 4.1%. It was 4.6% in 2021.

4.6%2021
3.2%2022
3.2%2023
3.2%2024
3.3%2025

BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).

Getting to work

The average commute in the San Angelo area is 22 minutes each way, shorter than the typical metro (24 min). 12% of commuters spend 45 minutes or more. 71% drive alone, 0% take transit and 9% work from home (all workers, not just trades).

Census American Community Survey, 2024 1-year estimates (table S0801).

Population

The San Angelo area's population grew 0.3% from 2020 to 2025 (121,691 → 122,065), ranking #284 of 387 metros for growth (typical metro +2.5%). More people moved out than in (net -525).

121,6912020
120,8102021
120,5172022
120,8792023
121,7162024
122,0652025

Census Bureau population estimates, July 1 of each year, 2020–2025.

New construction

New-home permits in San Angelo are roughly flat from 2021 to 2025 (333 → 335).

3332021
3222022
2522023
2332024
3352025

In 2025 the San Angelo area approved permits for 335 new homes (333 single-family), or 2.8 per 1,000 residents, ranking #234 of 393 metros.

Competition

In 2024 the area had 18 one-person businesses (no employees) in industrial machinery repair, averaging $78,611 a year in revenue before expenses. See how San Angelo compares among the best cities to start an industrial machinery mechanic business.

They compete with 16 industrial machinery repair companies that have employees (about 112 workers in total). 50% of those companies have fewer than 5 employees.

Employee vs. working for yourself Your scenario

A model, not a market rate. It shows the break-even rate to match a $49,960 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.

Break-even rate

With your profit margin

How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.

Get industrial machinery mechanic pricing & estimate templates →

Compare San Angelo with another city →

Keep exploring

About this data

Local to the San Angelo metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank San Angelo against every other metro for industrial machinery mechanics. Every source, year and formula is on our data page.

Report a data issue on this page

Top