Home › Welder › ID › Lewiston

Welder pay in Lewiston, Idaho

Lewiston, ID-WA metro · BLS data, May 2025

$55,890median a year · +7% vs. typical U.S. metro
$26.87median an hour
#132of 382 U.S. metros
$61,310real pay after local prices

Salary rangeCost of livingJob marketWhat to chargeCompare cities

Pay: above averageReal pay: top 20%Jobs steady (+2.4%)

Welders in the Lewiston area earn a median of $55,890 a year, 7% above the typical U.S. metro. That ranks #132 of 382 metros for welder salaries across the U.S..

Within driving distance, the same work pays more in Walla Walla and Kennewick, but less in Coeur d'Alene.

It's one of 6 Idaho metros with published pay for this trade; see statewide welder pay.

Welder pay in Lewiston at a glance

  • Welders in the Lewiston, ID metro earn a median $55,890 a year ($26.87 an hour), #132 of 382 U.S. metros (BLS, May 2025).
  • The middle 80% earn between $44,050 and $63,940.
  • After local prices, that median buys what $61,310 would in a typical U.S. place (BEA, 2024).
  • A typical 1-bedroom rents for $943 a month, 20% of the median pay (HUD, FY2027).

Check your pay here

Enter a rate to see where it falls among welders in Lewiston.

Comparing two real offers with overtime and commutes? Use the job offer checker.

What this means Our calculation

Pay for welders here is above average compared with other U.S. metros, and in the top 20% once local prices are factored in. For the wider job market, unemployment is lower than in most metros (3.6%) and the population is growing at a typical pace (+1.5% since 2020). On your own, you'd join about 8 one-person industrial machinery repair businesses averaging $28,875 in revenue, and you'd need to bill roughly $71/hour to match the median salary (at our default assumptions).

Lewiston scorecard for welders Our calculation

Grades compare Lewiston with every other U.S. metro for this trade (A = top 20%).

BPay#132 of 382 metros
AReal pay$61,310 after local prices
ARent burden1-bed takes 20% of median pay
ALocal demand7.4 jobs per 1,000 workers
BJob market3.6% unemployment in 2025 (typical metro 4.1%)
FGoing independentsolo shops average $28,875 revenue

Pay Government data

Pay range

$44,050Entry · 10th$48,59025th$55,890Median$60,09075th$63,940Top · 90th

Shaded: the middle half of workers. Grey line: typical U.S. metro ($52,285).

Pay over time

The median pay for welders in the Lewiston area went from $44,230 in 2020 to $55,890 in 2025, up 26.4%. Prices rose 25% over the same period, so after inflation that's +0.8% — roughly keeping pace.

44,2302020
48,3802021
53,9602022
56,4402023
58,2102024
55,8902025

BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.

Compared with nearby metros

What the pay is really worth in Lewiston Our calculation

Prices in Lewiston run 9% below the U.S. average. Adjusted for that, a median paycheck here buys what $61,310 would in a typical place, ranking #73 of 377 on real pay.

$943Typical 1-bed rent / mo
$1,234Typical 2-bed rent / mo
20%of median pay goes to a 1-bed
Real pay or rent burden?

Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.

Want the full picture? Build a Lewiston budget on this pay from this pay, local rent and prices.

What welders do

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Blueprint-style drawing of a steel frame with a fillet weld in progress, illustrating welder work in Lewiston, Idaho
Welder pay in Lewiston, ID: $55,890 median a year ($26.87/hour), BLS May 2025.

Most important day-to-day tasks

  1. Operate safety equipment and use safe work habits.
  2. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
  3. Weld components in flat, vertical, or overhead positions.
  4. Detect faulty operation of equipment or defective materials and notify supervisors.
  5. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.

Outlook & getting started

Nationally, welder jobs are projected to grow 2.4% from 2025 to 2035 (all jobs: 3.5%), with about 40,300 openings a year. About 4% are self-employed.

+2.4%10-yr job growth
40,300openings / yr (U.S.)
High school diploma or equivalentTypical education
Moderate-term on-the-job trainingTypical training

What the work is like Government data

How often welders deal with each condition, from surveys of workers in the job.

Outdoors, in all kinds of weatherRarely
Indoors with heating and air conditioningOccasionally
Very hot or cold conditionsSometimes
Working at heightsOccasionally
Climbing ladders, scaffolds or polesRarely
Cramped spaces and awkward positionsOccasionally
Loud noiseOften
Hazardous conditionsSometimes
Standing, bending, kneeling and walkingSometimes
SittingOccasionally

Getting started usually takes some preparation (high school plus months of training).

O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.

Licensing in Idaho Official source

The main state licensing office in Idaho is the Idaho Division of Occupational and Professional Licenses. It can point you to the right license for welders.

Official Idaho licensing site ↗

Requirements for welders vary by state and sometimes by city; always confirm with the official agency.

On-the-job safety Government data

Nationally, welders have 43 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 50% below the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.

BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).

Highest-paying ID metros for welders

MetroMedianReal payJobs
PocatelloIDAHO · ID$58,140$65,395180
LewistonIDAHO · ID$55,890$61,310210
Coeur d'AleneIDAHO · ID$51,510$52,405230
Idaho FallsIDAHO · ID$50,770$53,775170
Boise CityIDAHO · ID$50,240$51,0621,400
Twin FallsIDAHO · ID$45,550$49,453290

See every metro in Idaho.

How much work is there? Government data

Local job market

The Lewiston area's unemployment rate was 3.6% in 2025 (all workers, not just welders), below the typical U.S. metro's 4.1%. It was 3.5% in 2021.

3.5%2021
3.1%2022
3.1%2023
3.4%2024
3.6%2025

BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).

Getting to work

The average commute in the Lewiston area is 16 minutes each way, shorter than the typical metro (24 min). 6% of commuters spend 45 minutes or more. 79% drive alone, 0% take transit and 12% work from home (all workers, not just trades).

Census American Community Survey, 2024 1-year estimates (table S0801).

Population

The Lewiston area's population grew 1.5% from 2020 to 2025 (64,475 → 65,450), ranking #233 of 387 metros for growth (typical metro +2.5%). People moving in (net +2,257) account for more than all of the change.

64,4752020
64,9882021
65,4872022
65,4462023
65,4322024
65,4502025

Census Bureau population estimates, July 1 of each year, 2020–2025.

New construction

New-home permits in Lewiston are up 143% from 2021 to 2025 (127 → 309).

1272021
1342022
1382023
2262024
3092025

In 2025 the Lewiston area approved permits for 309 new homes (155 single-family), or 4.7 per 1,000 residents, ranking #146 of 393 metros.

Competition

In 2024 the area had 8 one-person businesses (no employees) in industrial machinery repair, averaging $28,875 a year in revenue before expenses. See how Lewiston compares among the best cities to start a welder business.

They compete with 11 industrial machinery repair companies that have employees (about 49 workers in total). 73% of those companies have fewer than 5 employees.

Where to train near Lewiston Government data

1 school in or near Lewiston offers precision metal working (welding, machining, sheet metal) programs below the bachelor's level. Many people in this trade learn through an apprenticeship instead; a program can shorten it or get you hired as a helper.

SchoolCredentialYearly costRecent gradsFirst-year pay
Lewis-Clark State College
Lewiston, ID · Public
Associate degree$22,86313—
Lewis-Clark State College
Lewiston, ID · Public
Certificate$22,8632—

U.S. Department of Education College Scorecard (data updated October 2026). Cost is the school's average yearly cost of attendance before financial aid; earnings are the median for graduates one year after finishing, shown only where the school has enough graduates to publish. “—” means not published.

Employee vs. working for yourself Your scenario

A model, not a market rate. It shows the break-even rate to match a $55,890 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.

Break-even rate

With your profit margin

How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.

Get welder pricing & estimate templates →

Compare Lewiston with another city →

Keep exploring

About this data

Local to the Lewiston metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank Lewiston against every other metro for welders. Every source, year and formula is on our data page.

Report a data issue on this page

Top