Home › Carpenter › TX › Dallas

Carpenter pay in Dallas, Texas

Dallas-Fort Worth-Arlington, TX metro · BLS data, May 2025

$48,740median a year · -13% vs. typical U.S. metro
$23.44median an hour
#293of 390 U.S. metros
$47,279real pay after local prices

Salary rangeCost of livingJob marketWhat to chargeCompare cities

Pay: below averageReal pay: bottom 20%Jobs growing (+3.9%)

Carpenters in the Dallas area earn a median of $48,740 a year, 13% below the typical U.S. metro. That ranks #293 of 390 metros for carpenter pay nationwide.

Within driving distance, the same work pays more in Lawton, but less in Sherman.

It's one of 25 Texas metros with published pay for this trade; see carpenters across Texas.

Carpenter pay in Dallas at a glance

  • Carpenters in the Dallas, TX metro earn a median $48,740 a year ($23.44 an hour), #293 of 390 U.S. metros (BLS, May 2025).
  • The middle 80% earn between $36,440 and $63,880.
  • After local prices, that median buys what $47,279 would in a typical U.S. place (BEA, 2024).
  • A typical 1-bedroom rents for $1,513 a month, 37% of the median pay (HUD, FY2027).

Check your pay here

Enter a rate to see where it falls among carpenters in Dallas.

Comparing two real offers with overtime and commutes? Use the job offer checker.

What this means Our calculation

Pay for carpenters here is below average compared with other U.S. metros, and in the bottom 20% once local prices are factored in. For the wider job market, unemployment is about the same as in most metros (3.9%) and the population is growing faster than most (+10.6% since 2020). On your own, you'd join about 18,762 one-person building finishing work businesses averaging $83,322 in revenue, and you'd need to bill roughly $65/hour to match the median salary (at our default assumptions).

Dallas scorecard for carpenters Our calculation

Grades compare Dallas with every other U.S. metro for this trade (A = top 20%).

DPay#293 of 390 metros
FReal pay$47,279 after local prices
FRent burden1-bed takes 37% of median pay
ALocal demand8.3 new homes per 1,000 residents
CJob market3.9% unemployment in 2025 (typical metro 4.1%)
AGoing independentsolo shops average $83,322 revenue

Pay Government data

Pay range

$36,440Entry · 10th$43,64025th$48,740Median$57,00075th$63,880Top · 90th

Shaded: the middle half of workers. Grey line: typical U.S. metro ($56,155).

Pay over time

The median pay for carpenters in the Dallas area went from $40,280 in 2020 to $48,740 in 2025, up 21.0%. Prices rose 25% over the same period, so after inflation that's -3.5% — a real pay cut.

40,2802020
44,6802021
46,4902022
48,1102023
48,4202024
48,7402025

BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.

Compared with nearby metros

What the pay is really worth in Dallas Our calculation

Prices in Dallas run 3% above the U.S. average. Adjusted for that, a median paycheck here buys what $47,279 would in a typical place, ranking #373 of 384 on real pay.

$1,513Typical 1-bed rent / mo
$1,781Typical 2-bed rent / mo
37%of median pay goes to a 1-bed
Real pay or rent burden?

Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.

Want the full picture? Build a monthly budget for Dallas from this pay, local rent and prices.

What carpenters do

Construct, erect, install, or repair structures and fixtures made of wood and comparable materials, such as concrete forms; building frameworks, including partitions, joists, studding, and rafters; and wood stairways, window and door frames, and hardwood floors. May also install cabinets, siding, drywall, and batt or roll insulation. Includes brattice builders who build doors or brattices (ventilation walls or partitions) in underground passageways.

Blueprint-style drawing of a framed wall and roof with dimensions, illustrating carpenter work in Dallas, Texas
Carpenter pay in Dallas, TX: $48,740 median a year ($23.44/hour), BLS May 2025.

Most important day-to-day tasks

  1. Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.
  2. Follow established safety rules and regulations and maintain a safe and clean environment.
  3. Shape or cut materials to specified measurements, using hand tools, machines, or power saws.
  4. Select and order lumber or other required materials.
  5. Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.

Outlook & getting started

Nationally, carpenter jobs are projected to grow 3.9% from 2025 to 2035 (all jobs: 3.5%), with about 62,800 openings a year. About 25% are self-employed.

+3.9%10-yr job growth
62,800openings / yr (U.S.)
High school diploma or equivalentTypical education
ApprenticeshipTypical training

What the work is like Government data

How often carpenters deal with each condition, from surveys of workers in the job.

Outdoors, in all kinds of weatherOften
Indoors with heating and air conditioningSometimes
Very hot or cold conditionsSometimes
Working at heightsOften
Climbing ladders, scaffolds or polesSometimes
Cramped spaces and awkward positionsOccasionally
Loud noiseVery often
Hazardous conditionsOccasionally
Standing, bending, kneeling and walkingOften
SittingRarely

Getting started usually takes some preparation (high school plus months of training).

O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.

Getting started: registered apprenticeship Government data

Most carpenters train through a paid apprenticeship: you work and earn under experienced pros while taking classes, and pay usually rises as you progress. 727,586 people were active registered apprentices nationwide in FY2026, up 87% since FY2016, and construction is the largest field with 290,043 of them (40%), according to the U.S. Department of Labor.

Search apprenticeship openings near Dallas ↗Find training programs & sponsors ↗

Official U.S. Department of Labor tools at Apprenticeship.gov. Counts: DOL Apprentices by State dashboard, FY2026 (all occupations).

Licensing in Texas Official source

The main state licensing office in Texas is the Texas Department of Licensing and Regulation. Plumbers are licensed by the Texas State Board of Plumbing Examiners. It can point you to the right license for carpenters.

Official Texas licensing site ↗

Requirements for carpenters vary by state and sometimes by city; always confirm with the official agency.

On-the-job safety Government data

Nationally, carpenters have 165 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 1.9× the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.

BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).

Highest-paying TX metros for carpenters

MetroMedianReal payJobs
MidlandTEXAS · TX$60,830$63,508170
BeaumontTEXAS · TX$58,290$64,7341,000
OdessaTEXAS · TX$52,260$55,657180
AustinTEXAS · TX$50,260$51,2512,540
HoustonTEXAS · TX$49,670$50,3609,600
VictoriaTEXAS · TX$49,460$55,05430
San AntonioTEXAS · TX$48,900$51,6282,240
DallasTEXAS · TX$48,740$47,2799,480
AmarilloTEXAS · TX$47,780$52,037350
ShermanTEXAS · TX$47,740$50,911160

See every metro in Texas.

How much work is there? Government data

Local job market

The Dallas area's unemployment rate was 3.9% in 2025 (all workers, not just carpenters), below the typical U.S. metro's 4.1%. It was 5.1% in 2021.

5.1%2021
3.6%2022
3.8%2023
3.9%2024
3.9%2025

BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).

Getting to work

The average commute in the Dallas area is 29 minutes each way, longer than the typical metro (24 min). 20% of commuters spend 45 minutes or more. 70% drive alone, 1% take transit and 16% work from home (all workers, not just trades).

Census American Community Survey, 2024 1-year estimates (table S0801).

Population

The Dallas area's population grew 10.6% from 2020 to 2025 (7,667,416 → 8,477,157), ranking #30 of 387 metros for growth (typical metro +2.5%). People moving in (net +579,862) account for most of the change.

7,667,4162020
7,777,8442021
7,972,6522022
8,164,1402023
8,353,6002024
8,477,1572025

Census Bureau population estimates, July 1 of each year, 2020–2025.

Homes in Dallas

The Dallas area has about 3,235,415 homes. 28% were built before 1980 (typical metro 45%), so its housing is newer than most; 26% were built in 2010 or later. 60% of households own their home, and the median home value is $389,500.

Census American Community Survey, 2024 1-year estimates (table DP04).

New construction

New-home permits in Dallas are down 16% from 2021 to 2025 (78,705 → 66,179).

78,7052021
77,9272022
68,0292023
71,7882024
66,1792025

In 2025 the Dallas area approved permits for 66,179 new homes (39,790 single-family), or 8.3 per 1,000 residents, ranking #51 of 393 metros, among the busiest building markets in the country.

Competition

In 2024 the area had 18,762 one-person businesses (no employees) in building finishing work, averaging $83,322 a year in revenue before expenses. See how Dallas compares among the best cities to start a carpenter business.

They compete with 1,817 building finishing work companies that have employees (about 20,642 workers in total). 64% of those companies have fewer than 5 employees.

Working outdoors in Dallas Government data

In an average year, Dallas has 106 days at 90°F or hotter (more than most metros; typical metro 33), including 20 at 100°F or more, 29 nights below freezing (typical 90) and 52 days with a tenth of an inch of rain or more, and 2 inches of snow. Summer afternoons average 94°F and winter nights 38°F. That matters for carpenters: heat and freezes shape the working season and the hours.

NOAA U.S. Climate Normals, 1991–2020 averages, Dallas Ft Worth Airport, TX station. Compare cities on outdoor work weather.

Where to train near Dallas Government data

1 school in or near Dallas offers carpentry programs below the bachelor's level. Many people in this trade learn through an apprenticeship instead; a program can shorten it or get you hired as a helper.

SchoolCredentialYearly costRecent gradsFirst-year pay
Collin County Community College District
McKinney, TX · Public
Certificate$16,7111—
Collin County Community College District
McKinney, TX · Public
Associate degree$16,7110—

U.S. Department of Education College Scorecard (data updated October 2026). Cost is the school's average yearly cost of attendance before financial aid; earnings are the median for graduates one year after finishing, shown only where the school has enough graduates to publish. “—” means not published.

Employee vs. working for yourself Your scenario

A model, not a market rate. It shows the break-even rate to match a $48,740 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.

Break-even rate

With your profit margin

How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.

Get carpenter pricing & estimate templates →

Compare Dallas with another city →

Keep exploring

About this data

Local to the Dallas metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank Dallas against every other metro for carpenters. Every source, year and formula is on our data page.

Report a data issue on this page

Top