Ironworkers in the Dallas area earn a median of $53,600 a year, 16% below the typical U.S. metro. That ranks #123 of 155 metros for ironworkers nationwide.
Within driving distance, the same work pays more in Sherman, but less in Waco.
It's one of 13 Texas metros with published pay for this trade; see ironworker pay in Texas.
What this means Our calculation
Pay for ironworkers here is below average compared with other U.S. metros, and in the bottom 20% once local prices are factored in. For the wider job market, unemployment is about the same as in most metros (3.9%) and the population is growing faster than most (+10.6% since 2020). On your own, you'd join about 14,941 one-person foundation, framing & exterior work businesses averaging $106,925 in revenue, and you'd need to bill roughly $69/hour to match the median salary (at our default assumptions).
Dallas scorecard for ironworkers Our calculation
Grades compare Dallas with every other U.S. metro for this trade (A = top 20%).
Pay Government data
Pay range
Shaded: the middle half of workers. Grey line: typical U.S. metro ($64,000).
Pay over time
The median pay for ironworkers in the Dallas area went from $46,550 in 2022 to $53,600 in 2025, up 15.1%. Prices rose 10% over the same period, so after inflation that's +4.7% — a real raise.
BLS OEWS, May 2022–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.
Compared with nearby metros
Check your pay here
Enter a rate to see where it falls among ironworkers in Dallas.
Comparing two real offers with overtime and commutes? Use the job offer checker.
What the pay is really worth in Dallas Our calculation
Prices in the Dallas area run 3% above the U.S. average. Adjusted for that, a median paycheck here buys what $51,993 would in a typical place, ranking #137 of 154 on real pay.
Real pay or rent burden?
Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.
Want the full picture? Build a cost-of-living budget for Dallas from this pay, local rent and prices.
What ironworkers do
Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.
Most important day-to-day tasks
- Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
- Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
- Erect metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails.
- Assemble or inspect hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
- Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
Outlook & getting started
Nationally, ironworker jobs are projected to grow 3.1% from 2025 to 2035 (all jobs: 3.5%), with about 5,900 openings a year.
What the work is like Government data
How often ironworkers deal with each condition, from surveys of workers in the job.
Getting started usually takes some preparation (high school plus months of training).
O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.
Getting started: registered apprenticeship Government data
Most ironworkers train through a paid apprenticeship: you work and earn under experienced pros while taking classes, and pay usually rises as you progress. 727,586 people were active registered apprentices nationwide in FY2026, up 87% since FY2016, and construction is the largest field with 290,043 of them (40%), according to the U.S. Department of Labor.
Search apprenticeship openings near Dallas ↗Find training programs & sponsors ↗
Official U.S. Department of Labor tools at Apprenticeship.gov. Counts: DOL Apprentices by State dashboard, FY2026 (all occupations).
Licensing in Texas Official source
The main state licensing office in Texas is the Texas Department of Licensing and Regulation. Plumbers are licensed by the Texas State Board of Plumbing Examiners. It can point you to the right license for ironworkers.
Official Texas licensing site ↗
Requirements for ironworkers vary by state and sometimes by city; always confirm with the official agency.
On-the-job safety Government data
Nationally, ironworkers have 131 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 1.5× the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.
BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).
Highest-paying TX metros for ironworkers
| Metro | Median | Real pay | Jobs |
|---|---|---|---|
| AustinTEXAS · TX | $59,980 | $61,163 | 710 |
| AmarilloTEXAS · TX | $59,610 | $64,920 | 60 |
| HoustonTEXAS · TX | $58,030 | $58,837 | 3,000 |
| ShermanTEXAS · TX | $57,720 | $61,554 | 60 |
| Corpus ChristiTEXAS · TX | $57,440 | $61,983 | 330 |
| BeaumontTEXAS · TX | $57,220 | $63,545 | 310 |
| DallasTEXAS · TX | $53,600 | $51,993 | 2,850 |
| San AntonioTEXAS · TX | $50,120 | $52,916 | 510 |
| AbileneTEXAS · TX | $45,680 | $50,551 | 80 |
| WacoTEXAS · TX | $45,590 | $49,260 | 50 |
See every metro in Texas.
How much work is there? Government data
Local job market
The Dallas area's unemployment rate was 3.9% in 2025 (all workers, not just ironworkers), below the typical U.S. metro's 4.1%. It was 5.1% in 2021.
BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).
Getting to work
The average commute in the Dallas area is 29 minutes each way, longer than the typical metro (24 min). 20% of commuters spend 45 minutes or more. 70% drive alone, 1% take transit and 16% work from home (all workers, not just trades).
Census American Community Survey, 2024 1-year estimates (table S0801).
Population
The Dallas area's population grew 10.6% from 2020 to 2025 (7,667,416 → 8,477,157), ranking #30 of 387 metros for growth (typical metro +2.5%). People moving in (net +579,862) account for most of the change.
Census Bureau population estimates, July 1 of each year, 2020–2025.
Homes in Dallas
The Dallas area has about 3,235,415 homes. 28% were built before 1980 (typical metro 45%), so its housing is newer than most; 26% were built in 2010 or later. 60% of households own their home, and the median home value is $389,500.
Census American Community Survey, 2024 1-year estimates (table DP04).
New construction
New-home permits in Dallas are down 16% from 2021 to 2025 (78,705 → 66,179).
In 2025 the Dallas area approved permits for 66,179 new homes (39,790 single-family), or 8.3 per 1,000 residents, ranking #51 of 393 metros, among the busiest building markets in the country.
Competition
In 2024 the area had 14,941 one-person businesses (no employees) in foundation, framing & exterior work, averaging $106,925 a year in revenue before expenses. See how Dallas compares among the best cities to start an ironworker business.
They compete with 2,480 foundation, framing & exterior work companies that have employees (about 30,728 workers in total). 64% of those companies have fewer than 5 employees.
Working outdoors in Dallas Government data
In an average year, Dallas has 106 days at 90°F or hotter (more than most metros; typical metro 33), including 20 at 100°F or more, 29 nights below freezing (typical 90) and 52 days with a tenth of an inch of rain or more, and 2 inches of snow. Summer afternoons average 94°F and winter nights 38°F. That matters for ironworkers: heat and freezes shape the working season and the hours.
NOAA U.S. Climate Normals, 1991–2020 averages, Dallas Ft Worth Airport, TX station. Compare cities on outdoor work weather.
Employee vs. working for yourself Your scenario
A model, not a market rate. It shows the break-even rate to match a $53,600 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.
Break-even rate
With your profit margin
How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.
Get ironworker pricing & estimate templates →Compare Dallas with another city →
Keep exploring
Could this trade pay more somewhere else?
ToolBest cities for ironworkersRank every metro on pay, buying power, rent and jobs.Is a job offer here any good?
ToolCheck an offer in DallasSee where it falls among local ironworkers, after the commute.Could you afford to live here?
ToolDallas budgetMonthly take-home, HUD rent and local prices on this pay.About this data
Local to the Dallas metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank Dallas against every other metro for ironworkers. Every source, year and formula is on our data page.