Construction Laborers in the Raleigh area earn a median of $45,650 a year, 3% below the typical U.S. metro. That ranks #230 of 391 metros for construction laborers nationwide.
Within driving distance, the same work pays more in Durham and Pinehurst, but less in Goldsboro.
It's one of 15 North Carolina metros with published pay for this trade; see construction laborer pay in North Carolina.
What this means Our calculation
Pay for construction laborers here is about average compared with other U.S. metros, and below average once local prices are factored in. For the wider job market, unemployment is lower than in most metros (3.2%) and the population is growing faster than most (+12.6% since 2020). On your own, you'd join about 2,430 one-person site prep & specialty contracting businesses averaging $83,585 in revenue, and you'd need to bill roughly $62/hour to match the median salary (at our default assumptions).
Raleigh scorecard for construction laborers Our calculation
Grades compare Raleigh with every other U.S. metro for this trade (A = top 20%).
Pay Government data
Pay range
Shaded: the middle half of workers. Grey line: typical U.S. metro ($46,850).
Pay over time
The median pay for construction laborers in the Raleigh area went from $33,670 in 2020 to $45,650 in 2025, up 35.6%. Prices rose 25% over the same period, so after inflation that's +8.1% — a real raise.
BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.
Compared with nearby metros
Check your pay here
Enter a rate to see where it falls among construction laborers in Raleigh.
Comparing two real offers with overtime and commutes? Use the job offer checker.
What the pay is really worth in Raleigh Our calculation
Prices in the Raleigh area run 2% below the U.S. average. Adjusted for that, a median paycheck here buys what $46,507 would in a typical place, ranking #247 of 385 on real pay.
Real pay or rent burden?
Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.
Want the full picture? Build a cost-of-living budget for Raleigh from this pay, local rent and prices.
What construction laborers do
Perform tasks involving physical labor at construction sites. May operate hand and power tools of all types: air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble, debris, and other waste materials. May assist other craft workers.
Most important day-to-day tasks
- Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
- Lubricate, clean, or repair machinery, equipment, or tools.
- Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.
- Read plans, instructions, or specifications to determine work activities.
- Measure, mark, or record openings or distances to layout areas where construction work will be performed.
Outlook & getting started
Nationally, construction laborer jobs are projected to grow 7.3% from 2025 to 2035 (all jobs: 3.5%), with about 120,000 openings a year. About 27% are self-employed.
What the work is like Government data
How often construction laborers deal with each condition, from surveys of workers in the job.
Getting started usually takes some preparation (high school plus months of training).
O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.
Licensing in North Carolina Official source
The main state licensing office in North Carolina is the North Carolina Licensing Board for General Contractors. Electrical and plumbing/HVAC have their own state boards. It can point you to the right license for construction laborers.
Official North Carolina licensing site ↗
Requirements for construction laborers vary by state and sometimes by city; always confirm with the official agency.
On-the-job safety Government data
Nationally, construction laborers have 218 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 2.5× the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.
BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).
Highest-paying NC metros for construction laborers
| Metro | Median | Real pay | Jobs |
|---|---|---|---|
| AshevilleNORTH CAROLINA · NC | $47,520 | $49,240 | 1,340 |
| DurhamNORTH CAROLINA · NC | $46,560 | $47,719 | 1,120 |
| WilmingtonNORTH CAROLINA · NC | $46,090 | $47,800 | 1,870 |
| PinehurstNORTH CAROLINA · NC | $45,900 | $51,961 | 240 |
| CharlotteNORTH CAROLINA · NC | $45,850 | $47,099 | 10,840 |
| RaleighNORTH CAROLINA · NC | $45,650 | $46,507 | 6,360 |
| HickoryNORTH CAROLINA · NC | $44,550 | $50,347 | 800 |
| FayettevilleNORTH CAROLINA · NC | $43,740 | $47,555 | 600 |
| GreenvilleNORTH CAROLINA · NC | $42,420 | $47,985 | 450 |
| BurlingtonNORTH CAROLINA · NC | $42,320 | $45,410 | 400 |
See every metro in North Carolina.
How much work is there? Government data
Local job market
The Raleigh area's unemployment rate was 3.2% in 2025 (all workers, not just construction laborers), below the typical U.S. metro's 4.1%. It was 4.0% in 2021.
BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).
Getting to work
The average commute in the Raleigh area is 27 minutes each way, longer than the typical metro (24 min). 16% of commuters spend 45 minutes or more. 66% drive alone, 1% take transit and 24% work from home (all workers, not just trades).
Census American Community Survey, 2024 1-year estimates (table S0801).
Population
The Raleigh area's population grew 12.6% from 2020 to 2025 (1,417,382 → 1,595,720), ranking #20 of 387 metros for growth (typical metro +2.5%). People moving in (net +143,151) account for most of the change.
Census Bureau population estimates, July 1 of each year, 2020–2025.
Homes in Raleigh
The Raleigh area has about 659,228 homes. 17% were built before 1980 (typical metro 45%), so its housing is newer than most; 30% were built in 2010 or later. 65% of households own their home, and the median home value is $465,800.
Census American Community Survey, 2024 1-year estimates (table DP04).
New construction
New-home permits in Raleigh are down 19% from 2021 to 2025 (21,649 → 17,543).
In 2025 the Raleigh area approved permits for 17,543 new homes (11,760 single-family), or 11.8 per 1,000 residents, ranking #17 of 393 metros, among the busiest building markets in the country.
Competition
In 2024 the area had 2,430 one-person businesses (no employees) in site prep & specialty contracting, averaging $83,585 a year in revenue before expenses. See how Raleigh compares among the best cities to start a construction laborer business.
They compete with 335 site prep & specialty contracting companies that have employees (about 4,210 workers in total). 50% of those companies have fewer than 5 employees.
Working outdoors in Raleigh Government data
In an average year, Raleigh has 52 days at 90°F or hotter (more than most metros; typical metro 33), including 2 at 100°F or more, 65 nights below freezing (typical 90) and 75 days with a tenth of an inch of rain or more, and 5 inches of snow. Summer afternoons average 89°F and winter nights 34°F. That matters for construction laborers: heat and freezes shape the working season and the hours.
NOAA U.S. Climate Normals, 1991–2020 averages, Raleigh Durham International Airport, NC station. Compare cities on outdoor work weather.
Employee vs. working for yourself Your scenario
A model, not a market rate. It shows the break-even rate to match a $45,650 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.
Break-even rate
With your profit margin
How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.
Get construction laborer pricing & estimate templates →Compare Raleigh with another city →
Keep exploring
Could this trade pay more somewhere else?
ToolBest cities for construction laborersRank every metro on pay, buying power, rent and jobs.Is a job offer here any good?
ToolCheck an offer in RaleighSee where it falls among local construction laborers, after the commute.Could you afford to live here?
ToolRaleigh budgetMonthly take-home, HUD rent and local prices on this pay.About this data
Local to the Raleigh metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank Raleigh against every other metro for construction laborers. Every source, year and formula is on our data page.