Home › Welder › TX › San Angelo

Welder pay in San Angelo, Texas

San Angelo, TX metro · BLS data, May 2025

$46,440median a year · -11% vs. typical U.S. metro
$22.33median an hour
#348of 382 U.S. metros
$50,231real pay after local prices

Salary rangeCost of livingJob marketWhat to chargeCompare cities

Pay: bottom 20%Real pay: bottom 20%Jobs steady (+2.4%)

Welders in the San Angelo area earn a median of $46,440 a year, 11% below the typical U.S. metro. That ranks #348 of 382 metros for welder salaries across the U.S..

Within driving distance, the same work pays more in Midland and Abilene.

It's one of 25 Texas metros with published pay for this trade; see statewide welder pay.

Welder pay in San Angelo at a glance

  • Welders in the San Angelo, TX metro earn a median $46,440 a year ($22.33 an hour), #348 of 382 U.S. metros (BLS, May 2025).
  • The middle 80% earn between $37,040 and $62,100.
  • After local prices, that median buys what $50,231 would in a typical U.S. place (BEA, 2024).
  • A typical 1-bedroom rents for $1,032 a month, 27% of the median pay (HUD, FY2027).

Check your pay here

Enter a rate to see where it falls among welders in San Angelo.

Comparing two real offers with overtime and commutes? Use the job offer checker.

What this means Our calculation

Pay for welders here is in the bottom 20% of U.S. metros, and also in the bottom 20% once local prices are factored in. For the wider job market, unemployment is lower than in most metros (3.3%) and the population is growing slowly (+0.3% since 2020). On your own, you'd join about 18 one-person industrial machinery repair businesses averaging $78,611 in revenue, and you'd need to bill roughly $63/hour to match the median salary (at our default assumptions).

San Angelo scorecard for welders Our calculation

Grades compare San Angelo with every other U.S. metro for this trade (A = top 20%).

FPay#348 of 382 metros
FReal pay$50,231 after local prices
CRent burden1-bed takes 27% of median pay
ALocal demand5.4 jobs per 1,000 workers
AJob market3.3% unemployment in 2025 (typical metro 4.1%)
CGoing independentsolo shops average $78,611 revenue

Pay Government data

Pay range

$37,040Entry · 10th$37,69025th$46,440Median$59,24075th$62,100Top · 90th

Shaded: the middle half of workers. Grey line: typical U.S. metro ($52,285).

Pay over time

The median pay for welders in the San Angelo area went from $48,020 in 2020 to $46,440 in 2025, down 3.3%. Prices rose 25% over the same period, so after inflation that's -22.9% — a real pay cut.

48,0202020
37,6702021
38,9302022
46,0002023
46,0202024
46,4402025

BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.

Compared with nearby metros

San AngeloTEXAS · TX$46,440

What the pay is really worth in San Angelo Our calculation

Prices in San Angelo run 8% below the U.S. average. Adjusted for that, a median paycheck here buys what $50,231 would in a typical place, ranking #333 of 377 on real pay.

$1,032Typical 1-bed rent / mo
$1,350Typical 2-bed rent / mo
27%of median pay goes to a 1-bed
Real pay or rent burden?

Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.

Want the full picture? Build a San Angelo budget on this pay from this pay, local rent and prices.

What welders do

Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Blueprint-style drawing of a steel frame with a fillet weld in progress, illustrating welder work in San Angelo, Texas
Welder pay in San Angelo, TX: $46,440 median a year ($22.33/hour), BLS May 2025.

Most important day-to-day tasks

  1. Operate safety equipment and use safe work habits.
  2. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
  3. Weld components in flat, vertical, or overhead positions.
  4. Detect faulty operation of equipment or defective materials and notify supervisors.
  5. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.

Outlook & getting started

Nationally, welder jobs are projected to grow 2.4% from 2025 to 2035 (all jobs: 3.5%), with about 40,300 openings a year. About 4% are self-employed.

+2.4%10-yr job growth
40,300openings / yr (U.S.)
High school diploma or equivalentTypical education
Moderate-term on-the-job trainingTypical training

What the work is like Government data

How often welders deal with each condition, from surveys of workers in the job.

Outdoors, in all kinds of weatherRarely
Indoors with heating and air conditioningOccasionally
Very hot or cold conditionsSometimes
Working at heightsOccasionally
Climbing ladders, scaffolds or polesRarely
Cramped spaces and awkward positionsOccasionally
Loud noiseOften
Hazardous conditionsSometimes
Standing, bending, kneeling and walkingSometimes
SittingOccasionally

Getting started usually takes some preparation (high school plus months of training).

O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.

Licensing in Texas Official source

The main state licensing office in Texas is the Texas Department of Licensing and Regulation. Plumbers are licensed by the Texas State Board of Plumbing Examiners. It can point you to the right license for welders.

Official Texas licensing site ↗

Requirements for welders vary by state and sometimes by city; always confirm with the official agency.

On-the-job safety Government data

Nationally, welders have 43 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 50% below the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.

BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).

Highest-paying TX metros for welders

MetroMedianReal payJobs
OdessaTEXAS · TX$63,470$67,596790
MidlandTEXAS · TX$61,410$64,114810
Corpus ChristiTEXAS · TX$59,450$64,1521,280
BeaumontTEXAS · TX$59,190$65,7331,980
AustinTEXAS · TX$59,040$60,2042,210
HoustonTEXAS · TX$57,940$58,74515,850
AmarilloTEXAS · TX$55,460$60,401620
ShermanTEXAS · TX$55,020$58,675290
College StationTEXAS · TX$52,800$58,053330
LongviewTEXAS · TX$52,300$58,4461,270

See every metro in Texas.

How much work is there? Government data

Local job market

The San Angelo area's unemployment rate was 3.3% in 2025 (all workers, not just welders), below the typical U.S. metro's 4.1%. It was 4.6% in 2021.

4.6%2021
3.2%2022
3.2%2023
3.2%2024
3.3%2025

BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).

Getting to work

The average commute in the San Angelo area is 22 minutes each way, shorter than the typical metro (24 min). 12% of commuters spend 45 minutes or more. 71% drive alone, 0% take transit and 9% work from home (all workers, not just trades).

Census American Community Survey, 2024 1-year estimates (table S0801).

Population

The San Angelo area's population grew 0.3% from 2020 to 2025 (121,691 → 122,065), ranking #284 of 387 metros for growth (typical metro +2.5%). More people moved out than in (net -525).

121,6912020
120,8102021
120,5172022
120,8792023
121,7162024
122,0652025

Census Bureau population estimates, July 1 of each year, 2020–2025.

New construction

New-home permits in San Angelo are roughly flat from 2021 to 2025 (333 → 335).

3332021
3222022
2522023
2332024
3352025

In 2025 the San Angelo area approved permits for 335 new homes (333 single-family), or 2.8 per 1,000 residents, ranking #234 of 393 metros.

Competition

In 2024 the area had 18 one-person businesses (no employees) in industrial machinery repair, averaging $78,611 a year in revenue before expenses. See how San Angelo compares among the best cities to start a welder business.

They compete with 16 industrial machinery repair companies that have employees (about 112 workers in total). 50% of those companies have fewer than 5 employees.

Employee vs. working for yourself Your scenario

A model, not a market rate. It shows the break-even rate to match a $46,440 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.

Break-even rate

With your profit margin

How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.

Get welder pricing & estimate templates →

Compare San Angelo with another city →

Keep exploring

About this data

Local to the San Angelo metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank San Angelo against every other metro for welders. Every source, year and formula is on our data page.

Report a data issue on this page

Top