Home › Maintenance Technician › NY › Binghamton

Maintenance Technician pay in Binghamton, New York

Binghamton, NY metro · BLS data, May 2025

$49,220median a year · +2% vs. typical U.S. metro
$23.66median an hour
#158of 393 U.S. metros
$53,003real pay after local prices

Salary rangeCost of livingJob marketWhat to chargeCompare cities

Pay: above averageReal pay: above averageJobs growing (+4.2%)

Maintenance Technicians in the Binghamton area earn a median of $49,220 a year, 2% above the typical U.S. metro. That ranks #158 of 393 metros for maintenance technician salaries across the U.S..

Within driving distance, the same work pays more in Elmira and Scranton, but less in Ithaca.

It's one of 13 New York metros with published pay for this trade; see statewide maintenance technician pay.

Maintenance Technician pay in Binghamton at a glance

  • Maintenance technicians in the Binghamton, NY metro earn a median $49,220 a year ($23.66 an hour), #158 of 393 U.S. metros (BLS, May 2025).
  • The middle 80% earn between $36,900 and $71,150.
  • After local prices, that median buys what $53,003 would in a typical U.S. place (BEA, 2024).
  • A typical 1-bedroom rents for $954 a month, 23% of the median pay (HUD, FY2027).

Check your pay here

Enter a rate to see where it falls among maintenance technicians in Binghamton.

Comparing two real offers with overtime and commutes? Use the job offer checker.

What this means Our calculation

Pay for maintenance technicians here is above average compared with other U.S. metros, and also above average once local prices are factored in. For the wider job market, unemployment is about the same as in most metros (4.1%) and the population is shrinking (-1.3% since 2020).

Binghamton scorecard for maintenance technicians Our calculation

Grades compare Binghamton with every other U.S. metro for this trade (A = top 20%).

BPay#158 of 393 metros
BReal pay$53,003 after local prices
ARent burden1-bed takes 23% of median pay
BLocal demand11.7 jobs per 1,000 workers
CJob market4.1% unemployment in 2025 (typical metro 4.1%)

Pay Government data

Pay range

$36,900Entry · 10th$41,63025th$49,220Median$59,13075th$71,150Top · 90th

Shaded: the middle half of workers. Grey line: typical U.S. metro ($48,330).

Pay over time

The median pay for maintenance technicians in the Binghamton area went from $38,850 in 2020 to $49,220 in 2025, up 26.7%. Prices rose 25% over the same period, so after inflation that's +1.0% — a real raise.

38,8502020
37,9202021
40,9602022
44,1802023
46,7802024
49,2202025

BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.

Compared with nearby metros

What the pay is really worth in Binghamton Our calculation

Prices in Binghamton run 7% below the U.S. average. Adjusted for that, a median paycheck here buys what $53,003 would in a typical place, ranking #134 of 387 on real pay.

$954Typical 1-bed rent / mo
$1,219Typical 2-bed rent / mo
23%of median pay goes to a 1-bed
Real pay or rent burden?

Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.

Want the full picture? Build a Binghamton budget on this pay from this pay, local rent and prices.

What maintenance technicians do

Perform work involving the skills of two or more maintenance or craft occupations to keep machines, mechanical equipment, or the structure of a building in repair. Duties may involve pipe fitting; HVAC maintenance; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs.

Blueprint-style drawing of a gear and wrench with torque specs, illustrating maintenance technician work in Binghamton, New York
Maintenance Technician pay in Binghamton, NY: $49,220 median a year ($23.66/hour), BLS May 2025.

Most important day-to-day tasks

  1. Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions.
  2. Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
  3. Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.
  4. Repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices.
  5. Order parts, supplies, or equipment from catalogs or suppliers.

Outlook & getting started

Nationally, maintenance technician jobs are projected to grow 4.2% from 2025 to 2035 (all jobs: 3.5%), with about 148,700 openings a year. About 1% are self-employed.

+4.2%10-yr job growth
148,700openings / yr (U.S.)
High school diploma or equivalentTypical education
Moderate-term on-the-job trainingTypical training

What the work is like Government data

How often maintenance technicians deal with each condition, from surveys of workers in the job.

Outdoors, in all kinds of weatherOften
Indoors with heating and air conditioningOften
Very hot or cold conditionsOften
Working at heightsSometimes
Climbing ladders, scaffolds or polesOccasionally
Cramped spaces and awkward positionsSometimes
Loud noiseOften
Hazardous conditionsSometimes
Standing, bending, kneeling and walkingOften
SittingOccasionally

Getting started usually takes medium preparation (vocational training or an apprenticeship, often 1–2+ years).

O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.

Licensing in New York Official source

New York licenses most trades at the city or county level (e.g. New York City). Check with the building or licensing office where you plan to work.

Requirements for maintenance technicians vary by state and sometimes by city; always confirm with the official agency.

On-the-job safety Government data

Nationally, maintenance technicians have 212 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 2.5× the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.

BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).

Highest-paying NY metros for maintenance technicians

MetroMedianReal payJobs
New YorkNEW YORK · NY$59,550$52,904108,700
Kiryas JoelNEW YORK · NY$55,160$50,4103,080
SyracuseNEW YORK · NY$54,300$56,7153,550
BuffaloNEW YORK · NY$50,620$52,8155,980
KingstonNEW YORK · NY$50,230$49,876870
RochesterNEW YORK · NY$49,990$51,5175,870
ElmiraNEW YORK · NY$49,560$52,501440
AlbanyNEW YORK · NY$49,490$49,7064,970
BinghamtonNEW YORK · NY$49,220$53,0031,130
WatertownNEW YORK · NY$49,100$55,993760

See every metro in New York.

How much work is there? Government data

Local job market

The Binghamton area's unemployment rate was 4.1% in 2025 (all workers, not just maintenance technicians), equal to the typical U.S. metro's 4.1%. It was 5.0% in 2021.

5.0%2021
3.7%2022
3.6%2023
3.9%2024
4.1%2025

BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).

Getting to work

The average commute in the Binghamton area is 20 minutes each way, shorter than the typical metro (24 min). 7% of commuters spend 45 minutes or more. 76% drive alone, 2% take transit and 9% work from home (all workers, not just trades).

Census American Community Survey, 2024 1-year estimates (table S0801).

Population

The Binghamton area's population shrank 1.3% from 2020 to 2025 (246,497 → 243,189), ranking #345 of 387 metros for growth (typical metro +2.5%).

246,4972020
246,6452021
244,8952022
243,5402023
243,4382024
243,1892025

Census Bureau population estimates, July 1 of each year, 2020–2025.

New construction

New-home permits in Binghamton are down 6% from 2021 to 2025 (499 → 468).

4992021
4452022
3382023
4832024
4682025

In 2025 the Binghamton area approved permits for 468 new homes (159 single-family), or 1.9 per 1,000 residents, ranking #301 of 393 metros.

Employee vs. working for yourself Your scenario

A model, not a market rate. It shows the break-even rate to match a $49,220 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.

Break-even rate

With your profit margin

How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.

Get maintenance technician pricing & estimate templates →

Compare Binghamton with another city →

Keep exploring

About this data

Local to the Binghamton metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank Binghamton against every other metro for maintenance technicians. Every source, year and formula is on our data page.

Report a data issue on this page

The Census doesn't publish one-person business or competition figures for maintenance technicians as a separate industry, so that section is left out.

Top