Home › Plumber › NY › Glens Falls

Plumber pay in Glens Falls, New York

Glens Falls, NY metro · BLS data, May 2025

$81,820median a year · +33% vs. typical U.S. metro
$39.34median an hour
#45of 387 U.S. metros
$86,248real pay after local prices

Salary rangeCost of livingJob marketWhat to chargeCompare cities

Pay: top 20%Real pay: top 20%Jobs growing (+6.8%)

Plumbers in the Glens Falls area earn a median of $81,820 a year, 33% above the typical U.S. metro. That ranks #45 of 387 metros for plumber salaries across the U.S..

Within driving distance, the same work pays more in Pittsfield and Springfield, but less in Albany.

It's one of 13 New York metros with published pay for this trade; see statewide plumber pay.

Plumber pay in Glens Falls at a glance

  • Plumbers in the Glens Falls, NY metro earn a median $81,820 a year ($39.34 an hour), #45 of 387 U.S. metros (BLS, May 2025).
  • The middle 80% earn between $43,860 and $124,990.
  • After local prices, that median buys what $86,248 would in a typical U.S. place (BEA, 2024).
  • A typical 1-bedroom rents for $1,073 a month, 16% of the median pay (HUD, FY2027).

Check your pay here

Enter a rate to see where it falls among plumbers in Glens Falls.

Comparing two real offers with overtime and commutes? Use the job offer checker.

What this means Our calculation

Pay for plumbers here is in the top 20% of U.S. metros, and also in the top 20% once local prices are factored in. For the wider job market, unemployment is lower than in most metros (3.6%) and the population is shrinking (-1.9% since 2020). On your own, you'd join about 63 one-person plumbing & HVAC contracting businesses averaging $102,762 in revenue, and you'd need to bill roughly $94/hour to match the median salary (at our default assumptions).

Glens Falls scorecard for plumbers Our calculation

Grades compare Glens Falls with every other U.S. metro for this trade (A = top 20%).

APay#45 of 387 metros
AReal pay$86,248 after local prices
ARent burden1-bed takes 16% of median pay
DLocal demand2.6 new homes per 1,000 residents
BJob market3.6% unemployment in 2025 (typical metro 4.1%)
AGoing independentsolo shops average $102,762 revenue

Pay Government data

Pay range

$43,860Entry · 10th$54,85025th$81,820Median$120,94075th$124,990Top · 90th

Shaded: the middle half of workers. Grey line: typical U.S. metro ($61,430).

Pay over time

The median pay for plumbers in the Glens Falls area went from $47,700 in 2020 to $81,820 in 2025, up 71.5%. Prices rose 25% over the same period, so after inflation that's +36.8% — a real raise.

47,7002020
62,5802021
56,9402022
59,8202023
61,3102024
81,8202025

BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.

Compared with nearby metros

What the pay is really worth in Glens Falls Our calculation

Prices in Glens Falls run 5% below the U.S. average. Adjusted for that, a median paycheck here buys what $86,248 would in a typical place, ranking #43 of 383 on real pay.

$1,073Typical 1-bed rent / mo
$1,347Typical 2-bed rent / mo
16%of median pay goes to a 1-bed
Real pay or rent burden?

Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.

Want the full picture? Build a Glens Falls budget on this pay from this pay, local rent and prices.

What plumbers do

Assemble, install, alter, and repair pipelines or pipe systems that carry water, steam, air, or other liquids or gases. May install heating and cooling equipment and mechanical control systems. Includes sprinkler fitters.

Blueprint-style drawing of a copper supply line running to a fixture, illustrating plumber work in Glens Falls, New York
Plumber pay in Glens Falls, NY: $81,820 median a year ($39.34/hour), BLS May 2025.

Most important day-to-day tasks

  1. Shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
  2. Install underground storm, sanitary, or water piping systems, extending piping as needed to connect fixtures and plumbing.
  3. Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing, or welding equipment.
  4. Locate and mark the position of pipe installations, connections, passage holes, or fixtures in structures, using measuring instruments such as rulers or levels.
  5. Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.

Outlook & getting started

Nationally, plumber jobs are projected to grow 6.8% from 2025 to 2035 (all jobs: 3.5%), with about 42,000 openings a year. About 8% are self-employed.

+6.8%10-yr job growth
42,000openings / yr (U.S.)
High school diploma or equivalentTypical education
ApprenticeshipTypical training

What the work is like Government data

How often plumbers deal with each condition, from surveys of workers in the job.

Outdoors, in all kinds of weatherOften
Indoors with heating and air conditioningSometimes
Very hot or cold conditionsOften
Working at heightsOften
Climbing ladders, scaffolds or polesOften
Cramped spaces and awkward positionsOften
Loud noiseOften
Hazardous conditionsSometimes
Standing, bending, kneeling and walkingOften
SittingRarely

Getting started usually takes medium preparation (vocational training or an apprenticeship, often 1–2+ years).

O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.

Getting started: registered apprenticeship Government data

Most plumbers train through a paid apprenticeship: you work and earn under experienced pros while taking classes, and pay usually rises as you progress. 727,586 people were active registered apprentices nationwide in FY2026, up 87% since FY2016, and construction is the largest field with 290,043 of them (40%), according to the U.S. Department of Labor.

Search apprenticeship openings near Glens Falls ↗Find training programs & sponsors ↗

Official U.S. Department of Labor tools at Apprenticeship.gov. Counts: DOL Apprentices by State dashboard, FY2026 (all occupations).

Licensing in New York Official source

New York licenses most trades at the city or county level (e.g. New York City). Check with the building or licensing office where you plan to work.

Requirements for plumbers vary by state and sometimes by city; always confirm with the official agency.

On-the-job safety Government data

Nationally, plumbers have 144 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 1.7× the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.

BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).

Highest-paying NY metros for plumbers

MetroMedianReal payJobs
BinghamtonNEW YORK · NY$87,990$94,752280
Glens FallsNEW YORK · NY$81,820$86,248110
New YorkNEW YORK · NY$78,610$69,83621,040
AlbanyNEW YORK · NY$77,460$77,7981,470
RochesterNEW YORK · NY$73,580$75,8281,460
UticaNEW YORK · NY$72,810$78,562140
BuffaloNEW YORK · NY$72,230$75,3621,430
KingstonNEW YORK · NY$70,190$69,696180
SyracuseNEW YORK · NY$67,040$70,022840
Kiryas JoelNEW YORK · NY$64,990$59,394780

See every metro in New York.

How much work is there? Government data

Local job market

The Glens Falls area's unemployment rate was 3.6% in 2025 (all workers, not just plumbers), below the typical U.S. metro's 4.1%. It was 4.7% in 2021.

4.7%2021
3.3%2022
3.3%2023
3.5%2024
3.6%2025

BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).

Getting to work

The average commute in the Glens Falls area is 26 minutes each way, longer than the typical metro (24 min). 15% of commuters spend 45 minutes or more. 78% drive alone, 1% take transit and 8% work from home (all workers, not just trades).

Census American Community Survey, 2024 1-year estimates (table S0801).

Population

The Glens Falls area's population shrank 1.9% from 2020 to 2025 (126,724 → 124,373), ranking #360 of 387 metros for growth (typical metro +2.5%).

126,7242020
126,6862021
126,2692022
125,5192023
125,0832024
124,3732025

Census Bureau population estimates, July 1 of each year, 2020–2025.

Homes in Glens Falls

The Glens Falls area has about 70,037 homes. 59% were built before 1980 (typical metro 45%), so its housing is older than most; 7% were built in 2010 or later. Older homes often need more repair, replacement and upgrade work. 74% of households own their home, and the median home value is $265,600.

Census American Community Survey, 2024 1-year estimates (table DP04).

New construction

New-home permits in Glens Falls are down 15% from 2021 to 2025 (384 → 327).

3842021
2922022
2382023
3552024
3272025

In 2025 the Glens Falls area approved permits for 327 new homes (278 single-family), or 2.6 per 1,000 residents, ranking #252 of 393 metros.

Competition

In 2024 the area had 63 one-person businesses (no employees) in plumbing & HVAC contracting, averaging $102,762 a year in revenue before expenses. See how Glens Falls compares among the best cities to start a plumber business.

They compete with 41 plumbing & HVAC contracting companies that have employees (about 575 workers in total). 44% of those companies have fewer than 5 employees.

Working outdoors in Glens Falls Government data

In an average year, Glens Falls has 6 days at 90°F or hotter (fewer than most metros; typical metro 33), 160 nights below freezing (typical 90) and 77 days with a tenth of an inch of rain or more. Summer afternoons average 79°F and winter nights 13°F. That matters for plumbers: heat and freezes shape the working season and the hours.

NOAA U.S. Climate Normals, 1991–2020 averages, Glens Falls Airport, NY station. Compare cities on outdoor work weather.

Employee vs. working for yourself Your scenario

A model, not a market rate. It shows the break-even rate to match a $81,820 employee salary once you cover what an employer normally pays for (including the employer half of Social Security and Medicare, 7.65%), then adds your profit margin. Change any number.

Break-even rate

With your profit margin

How this calculator works. Weighing a contractor job against a W-2 one? Try the 1099 vs. W-2 comparison. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.

Get plumber pricing & estimate templates →

Compare Glens Falls with another city →

Keep exploring

About this data

Local to the Glens Falls metro: pay (BLS, May 2025) and pay over time (2020–2025, CPI-adjusted), prices (BEA, 2024), rent (HUD, FY2027), new construction, housing, population and commuting (Census), unemployment (BLS) and business counts (Census, by industry). National: job outlook and training (BLS projections), injury rates (BLS) and duties (O*NET). Jobs are employment estimates, not open positions; grades rank Glens Falls against every other metro for plumbers. Every source, year and formula is on our data page.

Report a data issue on this page

Top