Home › Ironworker › NY › New York

Ironworker pay in New York, New York

New York-Newark-Jersey City, NY-NJ metro · BLS data, May 2025

$102,060median a year · +59% vs. typical U.S. metro
$49.07median an hour
#11of 155 U.S. metros
$90,669real pay after local prices

Salary rangeCost of livingJob marketWhat to chargeCompare cities

Pay: top 20%Real pay: top 20%Jobs steady (+3.1%)

Ironworkers in the New York area earn a median of $102,060 a year, 59% above the typical U.S. metro. That ranks #11 of 155 metros nationwide.

Within driving distance, the same work pays more in Trenton, but less in Bridgeport.

It's one of 6 New York metros with published pay for this trade; see ironworkers across New York.

What this means Our calculation

Pay for ironworkers here is in the top 20% of U.S. metros, and also in the top 20% once local prices are factored in. For the wider job market, unemployment is higher than in most metros (4.8%) and the population is growing slowly (+0.6% since 2020). On your own, you'd join about 10,812 one-person foundation, framing & exterior work businesses averaging $63,590 in revenue, and you'd need to bill roughly $113/hour to match the median salary (at our default assumptions).

A summary of the numbers on this page; nothing here is estimated beyond them.

New York scorecard for ironworkers Our calculation

Grades compare New York with every other U.S. metro for this trade (A = top 20%).

APay#11 of 155 metros
AReal pay$90,669 after local prices
DRent burden1-bed takes 28% of median pay
DLocal demand2.2 new homes per 1,000 residents
DJob market4.8% unemployment in 2025 (typical metro 4.1%)
FGoing independentsolo shops average $63,590 revenue

Pay Government data

Pay range

$63,520Entry · 10th$82,16025th$102,060Median$124,64075th$130,640Top · 90th

Shaded: the middle half of workers. Grey line: typical U.S. metro ($64,000).

Pay over time

The median pay for ironworkers in the New York area went from $89,650 in 2020 to $102,060 in 2025, up 13.8%. Prices rose 25% over the same period, so after inflation that's -9.2% — a real pay cut.

89,6502020
99,1002021
101,9202022
103,0902023
104,8502024
102,0602025

BLS OEWS, May 2020–May 2025; inflation: CPI-U (May to May). Year-to-year changes can include survey noise.

Compared with nearby metros

What the pay is really worth in New York Our calculation

Prices in New York run 13% above the U.S. average. Adjusted for that, a median paycheck here buys what $90,669 would in a typical place, ranking #21 of 154 on real pay.

$2,406Typical 1-bed rent / mo
$2,724Typical 2-bed rent / mo
28%of median pay goes to a 1-bed

Two different views, don't combine them. Real pay already accounts for housing, because the price index includes rent. Rent burden shows what share of pay a typical 1-bedroom takes. Use either one, not both together.

What ironworkers do

Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.

Most important day-to-day tasks

  1. Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
  2. Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
  3. Erect metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails.
  4. Assemble or inspect hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
  5. Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.

Outlook & getting started

Nationally, ironworker jobs are projected to grow 3.1% from 2025 to 2035 (all jobs: 3.5%), with about 5,900 openings a year. About nan% are self-employed.

+3.1%10-yr job growth
5,900openings / yr (U.S.)
High school diploma or equivalentTypical education
ApprenticeshipTypical training

What the work is like Government data

How often ironworkers deal with each condition, from surveys of workers in the job.

Outdoors, in all kinds of weatherSometimes
Indoors with heating and air conditioningSometimes
Very hot or cold conditionsOften
Working at heightsOften
Climbing ladders, scaffolds or polesSometimes
Cramped spaces and awkward positionsSometimes
Loud noiseOften
Hazardous conditionsSometimes
Standing, bending, kneeling and walkingOften
SittingRarely

Getting started usually takes some preparation (high school plus months of training).

O*NET 31.0 Work Context and Job Zones (U.S. Department of Labor), national.

Getting started: registered apprenticeship Government data

Most ironworkers train through a paid apprenticeship: you work and earn under experienced pros while taking classes, and pay usually rises as you progress. 727,586 people were active registered apprentices nationwide in FY2026, up 87% since FY2016, and construction is the largest field with 290,043 of them (40%), according to the U.S. Department of Labor.

Search apprenticeship openings near New York ↗Find training programs & sponsors ↗

Official U.S. Department of Labor tools at Apprenticeship.gov. Counts: DOL Apprentices by State dashboard, FY2026 (all occupations).

Licensing in New York Official source

New York licenses most trades at the city or county level (e.g. New York City). Check with the building or licensing office where you plan to work.

Requirements for ironworkers vary by state and sometimes by city; always confirm with the official agency.

On-the-job safety Government data

Nationally, ironworkers have 131 injuries or illnesses serious enough to miss work per 10,000 full-time workers, 1.5× the rate for all jobs (87). The most common cause is being struck by or caught in objects and equipment.

BLS Survey of Occupational Injuries and Illnesses, 2023–2024 (national, cases with days away from work).

Highest-paying NY metros for ironworkers

MetroMedianReal payJobs
New YorkNEW YORK · NY$102,060$90,6692,300
Kiryas JoelNEW YORK · NY$97,150$88,785150
AlbanyNEW YORK · NY$77,110$77,446150
BuffaloNEW YORK · NY$76,420$79,734210
RochesterNEW YORK · NY$76,220$78,549110
SyracuseNEW YORK · NY$71,810$75,00480

See every metro in New York.

How much work is there? Government data

Local job market

The New York area's unemployment rate was 4.8% in 2025 (all workers, not just ironworkers), above the typical U.S. metro's 4.1%. It was 7.6% in 2021.

7.6%2021
4.4%2022
4.3%2023
4.4%2024
4.8%2025

BLS Local Area Unemployment Statistics, annual averages 2021–2025 (2025 preliminary).

Getting to work

The average commute in the New York area is 36 minutes each way, longer than the typical metro (24 min). 34% of commuters spend 45 minutes or more. 44% drive alone, 27% take transit and 13% work from home (all workers, not just trades).

Census American Community Survey, 2024 1-year estimates (table S0801).

Population

The New York area's population grew 0.6% from 2020 to 2025 (19,999,993 → 20,112,448), ranking #271 of 387 metros for growth (typical metro +2.5%). More people moved out than in (net -215,813).

19,999,9932020
19,704,4742021
19,629,3902022
19,788,9762023
20,080,0872024
20,112,4482025

Census Bureau population estimates, July 1 of each year, 2020–2025.

Homes in New York

The New York area has about 8,129,556 homes. 72% were built before 1980 (typical metro 45%), so its housing is older than most; 8% were built in 2010 or later. Older homes often need more repair, replacement and upgrade work. 51% of households own their home, and the median home value is $648,800.

Census American Community Survey, 2024 1-year estimates (table DP04).

New construction

New-home permits in New York are down 22% from 2021 to 2025 (56,661 → 44,444).

56,6612021
69,7532022
63,0302023
57,9292024
44,4442025

In 2025 the New York area approved permits for 44,444 new homes (10,477 single-family), or 2.2 per 1,000 residents, ranking #280 of 393 metros.

Competition

In 2024 the area had 10,812 one-person businesses (no employees) in foundation, framing & exterior work, averaging $63,590 a year in revenue before expenses.

They compete with 4,786 foundation, framing & exterior work companies that have employees (about 41,919 workers in total). 68% of those companies have fewer than 5 employees.

Employee vs. working for yourself Your scenario

A model, not a market rate. It shows the minimum you'd need to bill to match a $102,060 employee salary once you cover what an employer normally pays for. Change any number.

Minimum billing rate

How this calculator works. Billable hours are hours you can charge a customer. Driving, quoting, paperwork and slow weeks aren't billable, which is why 1,400 is a common starting point versus 2,080 paid hours as an employee.

Get ironworker pricing & estimate templates →

Compare New York with another city →

About this data

  • Pay: BLS Occupational Employment & Wage Statistics, May 2025, local to this metro.
  • Pay over time: BLS OEWS May 2020–2025, local; inflation from the Consumer Price Index (CPI-U).
  • Real pay: BEA Regional Price Parities, 2024, local.
  • Rent: HUD Fair Market Rents, FY2027, local (county rents weighted by population).
  • Job outlook, education, training: BLS Employment Projections 2025–35, national.
  • Duties: O*NET 31.0, national.
  • Safety: BLS Survey of Occupational Injuries and Illnesses, 2023–2024, national.
  • New construction: Census Building Permits, 2021–2025, local.
  • Housing: Census American Community Survey, 2024 1-year, local (age of homes, ownership, home values).
  • Population: Census Bureau population estimates, 2020–2025, local.
  • Commute: Census American Community Survey, 2024 1-year, local, all workers.
  • Unemployment: BLS Local Area Unemployment Statistics, 2021–2025 annual averages, local, all workers (2025 preliminary).
  • Competition: Census Nonemployer Statistics 2024 and County Business Patterns 2023, local, reported by industry, so related trades can share one figure.
  • Jobs are employment estimates, not open positions. Grades rank this metro against all others for the same trade.

Report a data issue on this page

Full methodology

Top